ULTIMATE TENSILE STRENGTH (UTS)

• For both Initial and Target Moisture Contents, use 15.0 for 15%. DO NOT USE % SIGN!
  
• No moisture content can be below 8.0 or above 23.0
  
• Initial Property Value (PICK ONE)
  psi (e.g., 6541)
  kpsi (e.g., 6.541)
  kPa (e.g., 45098)
  MPa (e.g., 45.098)
  

ASTM D-1990 Model
Quadratic Surface Model
Both Models

NOTE!! If you're using the ASTM D-1990 Model for adjusting datasets for purposes other than deriving characteristic values of visually graded dimension lumber, then you should consider using the Quadratic Surface Model.

Initial Moisture Content

Initial Property Value

Target Moisture Content